> ## Documentation Index
> Fetch the complete documentation index at: https://docs.zuper.co/llms.txt
> Use this file to discover all available pages before exploring further.

# Check call quality

Use the call quality check to verify that your internet connection, microphone, and audio are ready for Zuper Connect calls. The test takes about 20 seconds and provides a quality rating to help you identify and troubleshoot potential call issues.

> [accordion] **Before you start**
>
> Make sure you meet the following requirements before running the test:
>
> * **Internet connection:** Make sure you're connected to the internet.
> * **Call status:** Finish any ongoing calls and wait until no incoming calls are ringing.
> * **Microphone:** Connect the microphone or headset you normally use for calls. Allow microphone access if your browser requests permission.

## Run the call quality test

1. In the top bar of Zuper, click the phone icon to open the Zuper Connect dialer.
2. Click the **signal bars** icon next to the phone number to open the call quality panel.

![Signalbar](https://mintcdn.com/zuperinc/K8EDUZikCRDjjEma/images/signalbar.png?fit=max\&auto=format\&n=K8EDUZikCRDjjEma\&q=85\&s=b0eb01ede37b6e5dea8b07827fd14154)

3. Click **Run test** to start the call quality check.

![Call Quality Run Test](https://mintcdn.com/zuperinc/K8EDUZikCRDjjEma/images/call-quality-run-test.png?fit=max\&auto=format\&n=K8EDUZikCRDjjEma\&q=85\&s=0f757a83d221dabdff1d6bbdbcc13d09)

4. When **Checking your microphone…** appears, speak in your normal voice for 3 seconds. For example, say, "*Testing, one, two, three*." A meter displays your microphone input level.

5. Wait for the test call to connect. The status changes to **Connecting test call…**.

6. Once connected, the test measures your call quality for 15 seconds. During this time:
   * You hear music from the test line.
   * A countdown shows the remaining test time.
   * Occasionally, speak to check your microphone.

7. When the test finishes, your results appear automatically.

During the test, you can monitor live readings for latency, jitter, packet loss, quality score, and microphone level.

![Progressquality](https://mintcdn.com/zuperinc/K8EDUZikCRDjjEma/images/progressquality.png?fit=max\&auto=format\&n=K8EDUZikCRDjjEma\&q=85\&s=716392b3d02763a45bc41190828128f9)

### Stop a test

To stop the test before it finishes, click **Cancel test**. You can also close the panel or press `Esc`.

The test stops automatically if you receive an incoming call, allowing you to answer it. Cancelled or interrupted tests aren't saved.

## Understand your test results

After the test finishes, you'll see an overall rating, a summary of your connection quality, and when the test was performed.

![Callresult](https://mintcdn.com/zuperinc/K8EDUZikCRDjjEma/images/callresult.png?fit=max\&auto=format\&n=K8EDUZikCRDjjEma\&q=85\&s=daf2488b016b1d0c5944c5a4eea1a8e8)

| Rating | What it means |
| - | - |
| **Excellent** | Your connection is performing well for calls. |
| **Good** | Your connection is suitable for calls. |
| **Fair** | Calls should work, but you may experience occasional audio interruptions or issues with an audio check. |
| **Poor** | Your connection or audio setup may prevent reliable calls. Review the checks marked with a red dot. |

Your overall rating is based on the lowest rating among the individual checks. For example, if all checks are rated Excellent except one Poor check, your overall rating is **Poor**.

If a check is rated Fair or Poor, you'll see a recommendation below it. To learn more about a check, hover over or select the information icon next to its name.

Expand a check to see what it measures and the values used to determine its rating.

> [accordion] Connection time
>
> Time taken for the test call to connect.
>
> | Rating | Result |
> | - | - |
> | **Excellent** | 2.5 seconds or less |
> | **Good** | 4 seconds or less |
> | **Fair** | 8 seconds or less |
> | **Poor** | More than 8 seconds |

> [accordion] Call quality score
>
> Estimated call audio quality, measured on a scale of 1 (lowest) to 4.5 (highest).
>
> | Rating | Result |
> | - | - |
> | **Excellent** | 4.2 or higher |
> | **Good** | 3.8 or higher |
> | **Fair** | 3.0 or higher |
> | **Poor** | Below 3.0 |

> [accordion] Latency
>
> Time taken for audio to travel to its destination and return. High latency can cause people to talk over each other.
>
> | Rating | Result |
> | - | - |
> | **Excellent** | 150 ms or less |
> | **Good** | 250 ms or less |
> | **Fair** | 400 ms or less |
> | **Poor** | More than 400 ms |

> [accordion] Jitter
>
> Variation in the time it takes audio packets to arrive. High jitter can make audio sound choppy or robotic.
>
> | Rating | Result |
> | - | - |
> | **Excellent** | 10 ms or less |
> | **Good** | 20 ms or less |
> | **Fair** | 30 ms or less |
> | **Poor** | More than 30 ms |

> [accordion] Packet loss
>
> Percentage of audio packets lost during transmission. Packet loss can cause words to cut out.
>
> | Rating | Result |
> | - | - |
> | **Excellent** | 0.5% or less |
> | **Good** | 1% or less |
> | **Fair** | 3% or less |
> | **Poor** | More than 3% |

> [accordion] Connection path
>
> Network route used to transmit your call audio.
>
> | Rating | Result |
> | - | - |
> | **Excellent** | Direct (UDP) |
> | **Good** | Relayed (UDP) |
> | **Fair** | TCP, Relayed (TCP), or Relayed (TLS) |

> [accordion] Microphone
>
> Whether your microphone is detected and captures audio at an appropriate level.
>
> | Rating | Result |
> | - | - |
> | **Excellent** | Good level |
> | **Fair** | Quiet, Too loud, Didn't hear you, or Not reaching call |
> | **Poor** | Blocked, Not found, In use, Not available, No signal, or No sound |

> [accordion] Incoming audio
>
> Whether audio from the test call reaches your browser.
>
> | Rating | Result |
> | - | - |
> | **Excellent** | Receiving |
> | **Poor** | No audio |

**Additional information:**

* Latency, jitter, and call quality score are calculated as averages over the 15-second test call.
* The Connection path check isn't displayed if the connection path can't be measured.
* If the test call can't be completed, the overall rating is Poor. Instead of the full results, you'll see a single issue, such as **Call connection: Failed** or a **Microphone** problem.
* Depending on the test results, additional information may appear, including **Calling region**, **Network**, **Public IP**, and **Microphone** (the name of your microphone).

## Troubleshoot call quality issues

If your test results show a Fair or Poor rating, expand the relevant section below to identify the issue and follow the recommended steps.

> [accordion] Fix microphone issues
>
> | Result | What to do |
> | - | - |
> | **Microphone: Blocked** | Allow microphone access for Zuper in your browser. Click the lock icon in the address bar to review site permissions. Also check your computer's privacy settings. Run the test again. |
> | **Microphone: Not found** or **In use** | Connect a microphone or headset if one isn't connected. If another application is using your microphone, close that application and try again. |
> | **Microphone: No signal** or **No sound** | Check whether your microphone is muted on your headset or in your system settings. Make sure the correct microphone is selected. |
> | **Microphone: Didn't hear you** | Speak during the microphone check and make sure your microphone picks up your voice. Run the test again. |
> | **Microphone: Quiet** | Speak louder, move the microphone closer to your mouth, or increase the input volume. |
> | **Microphone: Too loud** | Reduce the microphone input volume or move the microphone farther away from your mouth. |
> | **Microphone: Not reaching call** | Your microphone is working, but its audio isn't reaching the test call. Check that the correct microphone is selected in Zuper Connect's audio settings. |

> [accordion] Fix network and connection issues
>
> | Result | What to do |
> | - | - |
> | **Call connection: Failed** | Check your internet connection and run the test again. If the issue persists, your network may be blocking calling traffic. Contact your IT team for assistance. |
> | **Incoming audio: No audio** | Your firewall or VPN may be blocking incoming call audio. Try disconnecting from your VPN or ask your IT team to allow the required calling traffic. |
> | **Connection path: TCP**, **Relayed (TCP)**, or **Relayed (TLS)** | Your network may be blocking UDP traffic, which can affect call quality. Ask your IT team to allow UDP traffic for calls. |
> | **High latency, jitter, or packet loss** | Move closer to your Wi-Fi router or switch to a wired connection. Close applications using significant bandwidth, such as large downloads, streaming services, and video calls. If you're using a VPN, try disconnecting from it. |

After making the recommended changes, run the test again to check whether your call quality has improved.

## View your last test result

Your most recent call quality test result is saved in the browser where you ran the test. You can view it again without running a new test.

To view your last result:

1. Open the Zuper Connect dialer.
2. Click the signal bars icon.
3. Select **Last run test**. The button displays when the test was last performed, such as **Tested 5 min ago**.

> [!NOTE]
>
> **Note**: Your result is saved only in the browser where you ran the test, and clearing your browser's site data removes the saved result.

## Share your test results with Zuper Support

If you still have call problems, send your result to Zuper Support:

1. Open your result.
2. Click **Copy results for support**. The button changes to **Copied — paste it into your support request**.
3. Paste the text into your support request or email.

> [!WARNING]
>
> **Warning**: The copied results contain your name, public IP address, microphone name, and browser details. Share this information only through a support request to Zuper Support.

![Call Quality Copy](https://mintcdn.com/zuperinc/K8EDUZikCRDjjEma/images/call-quality-copy.png?fit=max\&auto=format\&n=K8EDUZikCRDjjEma\&q=85\&s=256e68bd79713f972bad7add6258347f)

If you see **Could not copy**, your browser may have blocked clipboard access. Open Zuper in a regular browser tab and try copying the results again.

## Frequently asked questions

> [accordion] Does the test call anyone?
>
> No. The test connects to a private test line that plays music. It doesn't dial another person's phone number or appear in your call history.

> [accordion] Will I hear my own voice during the test?
>
> No. The test line plays music but doesn't play your voice back. Your microphone is checked by measuring its input level.

> [accordion] Why don't I see the signal bars icon?
>
> The call quality check is available only in the Zuper web app when your company's Zuper Connect calling provider is Twilio. Contact your Zuper admin if you aren't sure which provider your account uses.

> [accordion] Why can't I run the call quality test?
>
> You may be offline, or a call may be ringing or in progress. Reconnect to the internet or finish the ongoing call before running the test.

> [accordion] What does the red dot on the signal bars icon mean?
>
> A red dot on the dialer's signal bars icon indicates that you're offline. You can't make or receive calls until your internet connection is restored. When you're online, the icon turns green.
>
> This is different from the colored status indicators displayed next to individual checks in your test results.

> [accordion] Can I run the call quality test in the Zuper Field Service app?
>
> No. The call quality check is currently available only in the Zuper web app.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.